File Operations - ETC Power Control Processor Configuration Manual

File Operations

The "File Operations" menu provides tools to save and load
a configuration file, update firmware, and restore factory
defaults.
Operations from this menu provide operations for saving
and loading of files using removable USB media.
Save Configuration
Saving a panel configuration creates a file for storage to the root directory of a connected
USB storage device.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Load Configuration
Loading a panel configuration file replaces all existing configuration data (circuit assignment,
presets, sequences and patch) with the new configuration. Before loading a new
configuration onto the Power Control Processor, it is recommended that you save the existing
configuration file. See
Step 1:
37
Insert a USB storage device in the USB port on the front left side of the Power Control
Processor user interface
• The USB device must be compatible with the Power Control Processor. Reference
Compatible USB Storage Device
Press [Enter] ( ) to access the main menu.
Scroll to "File Operations" and press [Enter] (
displays.
Use the [Up] or [Down]
Press [Enter] ( ). The "Save Configuration" screen displays and the default "Filename:
echo1.cfg" is selected. You can save your file under a name between Echo1 and Echo16.
To edit the filename, press [Enter] (
Use the [Up] or [Down]
to make the selection.
Scroll to "Save to USB key" and press [Enter] (
USB". The file will always be saved to the root directory of the USB device.
Save Configuration
Insert a USB storage device in the USB port on the front left side of the Power Control
Processor user interface.
• The USB device must be compatible with the Power Control Processor. Reference
Compatible USB Storage Device
Save Configuration
Load Configuration
Update Firmware
Restore Defaults
page 15
on for information.
) to select. The "File Operations" menu
buttons to scroll to and select "Save Configuration".
). The selection will focus on "echo_#".
buttons to scroll through the list, and press [Enter] (
). The dialog will display "Saving to
page 37.
on
page 15
on for information.
Power Control Processor Configuration Manaul v2.1
File Operations
)