Installation And Connection; For The Installer; Levelling The Cooker - Siemens HL122210X Instruction Manual

Installation and connection

Electrical connection

For the installer

Safety precautions

Levelling the cooker

Wall fixing
10
The appliance must be connected to the mains by a
licensed expert. The regulations of your electricity
supplier must be observed.
Any damage arising from the appliance being
connected incorrectly will invalidate the guarantee.
An all-pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
This appliance complies with the testing regulations
for heating. It must be positioned with only one side
panel against high room or unit walls.
Electrical safety: The cooker corresponds to safety
class I and may only be used in conjunction with a
safety earth terminal.
A type H 05 VV F or equal rated lead must be used to
connect the appliance.
Appliances with a plug must only be connected to a
properly installed socket with maximum 25 A,
2
3x4 mm .
Always place the cooker directly on the floor.
The cooker has height adjustable feet. This allows
you to raise the plinth by about 15 mm.
Please observe the special installation instructions.
To prevent the cooker from tipping over, you must fix
it to the wall at the enclosed angle. Please observe the
installation instructions for fixing the oven to the wall.