Frymaster OCF30 Service & Parts Manual page 2

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS MANITOWOC
FOOD SERVICE EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART
PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS FACTORY AUTHORIZED
SERVICERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL
CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER DEAN AND ITS
AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY
THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO
THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN
UNAUTHORIZED SERVICE CENTER.
Copper wire suitable for at least 167°F (75°C) must be used for power connections.
The electrical power supply for this appliance must be the same as indicated on the rating and
serial number plate located on the inside of the fryer door.
This appliance must be connected to the voltage and phase as specified on the rating and serial
number plate located on the inside of the fryer door.
All wiring connections for this appliance must be made in accordance with the wiring diagrams
furnished with the equipment. Wiring diagrams are located on the inside of the fryer door.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
Do not attach accessories to this fryer unless fryer is secured from tipping. Personal injury may
result.
Frymaster fryers equipped with legs are for permanent installations. Fryers fitted with legs
must be lifted during movement to avoid damage and possible bodily injury. For a moveable or
portable installation, Frymaster optional equipment casters must be used.
Questions? Call 1-800-551-8633 or email at service@frymaster.com.
This equipment is intended for indoor use only. Do not install or operate this equipment in
outdoor areas.
NOTICE
DANGER
DANGER
DANGER
DANGER
DANGER
WARNING
WARNING
WARNING
Do not use water jets to clean this equipment.
WARNING
i