Powering On The Router; Observing Boot Information - HP MSR1003-8S Installation Manual

The console cable is correctly connected, the terminal or PC used for configuration has started, and
•
the configuration parameters have been set.
If a CF card is used, verify that the CF card is in position.
•
Make sure the installed interface modules are in position.
•

Powering on the router

1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power modules.

Observing boot information

Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.
Compiled Date
CPU ID
CPU L1 Cache
CPU L2 Cache
Memory Type
Memory Size
Memory Speed
Flash Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr100x-cmw710-system-e030206.bin.......................
.................................Done.
Loading file flash:/msr100x-cmw710-security-e030206.bin....Done.
Loading file flash:/msr100x-cmw710-voice-e030206.bin....Done.
Loading file flash:/msr100x-cmw710-data-e030206.bin......Done.
Loading file flash:/msr100x-cmw710-boot-e030206.bin........Done.
HP MSR1003-8S BootWare, Version 2.30
: Sep 11 2014
: 0x8
: 32KB
: 256KB
: DDR3 SDRAM
: 1024MB
: 400MHz
: 256MB
: 1.0
: 2.0
23
*
*
*