Preparing For Installation; Safety Recommendations; Safety Symbols; General Safety Recommendations - HP MSR1003-8S Installation Manual

Preparing for installation

The HP MSR1000 Router Series includes the models in
Table 1 HP MSR1000 Router Series models
Router model
MSR1002-4
MSR1003-8
MSR1003-8S
IMPORTANT:
For regulatory identification purposes, every MSR1000 router is assigned a regulatory model number
(RMN). These regulatory model numbers should not be confused with the marketing name HP MSR100X or
the product code.

Safety recommendations

Safety symbols

When reading this document, note the following symbols:
WARNING
followed can result in personal injury.
CAUTION
followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

Keep the chassis and installation tools away from walk areas.
•
• Make sure the ground is dry and flat and anti-slip measures are in place.
Unplug all the external cables (including the power cord) before moving the chassis.
•

Electricity safety

Locate the emergency power-off switch in the room before installation. Shut the power off at once in
•
case accident occurs. Disconnect the power cord of the router if necessary.
Make sure the router is reliably grounded.
•
Do not open or close the chassis cover when the router is powered on.
•
Product code
JG875A
JG732A
JH060A
means an alert that calls attention to important information that if not understood or
means an alert that calls attention to important information that if not understood or
Table 1.
HP description
HP MSR1002-4 Router
HP MSR1003-8 Router
HP MSR1003-8S Router
1
RMN
BJNGA-BB0034
BJNGA-BB0029
BJNGA-BB0029