Table of Contents
Advertisement
2.2 Hard Disk Installation
You can optionally install six 3.5" HDDs inside the DVR for recording videos.
1.
Make sure the DVR is power-off.
2.
Unscrew the two housing screws on the back panel of the DVR.
3.
Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
4.
Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the
DVR, and the other end to the SATA port on the HDD.
Silver Screw
HDD Bracket
10
EPHD16+U Universal DVR
Advertisement
Table of Contents
