Configuration; Event Handling - EverFocus EPHD16+U User Manual

5.2.1.1 Configuration

Item Description
Enable Enable / Disable video loss detection function.

5.2.1.2 Event Handling

Item Description
Log Check to log events when the video loss event happens.
Event Record Select channel for event recording when event occurs. The video
setup corresponds to the "Configuration → Recording Settings →
Event Video Recording".
Popup In the live mode, if video loss of a channel is detected, it will pop up
the channel full screen. You can specify a warning window display, 1:
the main screen, 2: the second screen.
Popup Channel When an event occurs, it will pop up the specified channel.
Buzzer Check to enable the buzzer when an event occurs.
Relay Select to enable the relay when an event occurs.
PTZ Specify the DVR behavior of whether to change to the PTZ control
mode to the specified channel when an event occurs.
Go Preset Moves the camera to the specified preset point when an event occurs.
Resume Preset Moves the camera back to the specified preset point when an event
is finished.
55
EPHD16+U Universal DVR