Basic Connection - EverFocus EPHD16+U User Manual

2.4 Basic Connection

The instructions below the figure describe the basic connection for the EPHD16+U.
Power Supply
1
4
Line Level
Audio In 1~8
1. Using the supplied Power Cord, connect one end to the
the other end to the
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
2. Connect the cameras to the DVR using the coaxial cables. For details on coaxial cable
requirements, please refer to 2.4.1 Cable Length Extension.
3. To listen to audio of video source, connect speakers to the Audio Out port Note that speaker
with a (built-in) amplifier and external power are required.
4. Connect the line level audio input devices to the DVR. Note that the audio input devices, such
as microphones, are required to have a (built-in) amplifier and external power supply.
5. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
6. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control buttons on the front panel.
7. Use a standard RJ-45 cable to connect the DVR to the network for remote viewing or using
EverFocus surveillance system (Genie XMS or PowerVideo Plus).
HD-SDI or Analog Camera 1~16
Main
Monitor
(HDMI)
100-240 VAC~ power outlet.
2
5 6
Main
Mouse
Monitor or USB
Web Remote
(VGA)
100-240 VAC~
14
EPHD16+U Universal DVR
Line Level
3
Audio Out
7
Network
Genie PowerVideo
Client XMS Plus (CMS)
port on the DVR and