Configuration; Motion Area Setup; Event Handling; Receiver Setup - EverFocus EPHD16+U User Manual

5.2.2.1 Configuration

Item Description
Enable Enable / Disable the motion detection function of this channel.
Sensitivity The sensitivity value is from 0 to 100. The higher value means higher
sensitivity.
Motion Area Enter to setup motion detection area.
5.2.2.1.1

Motion Area Setup

The motion detection has been divided into 22 x18 grids. The default detection area is full
screen. The screen is marked in transparent for detection area and grey for disabled area of
motion detection.
Item Description
CH01~ CH16 Selected channel motion detection function.
Mask Mouse Switch between "select" and "deselect" for cursor-dragging function.
Selection
Detect All Area Select entire screen as detection area.
Mask All Area Deselect entire detection area.
Apply to All Apply the current settings to all channels.
Exit Leave and save settings.
Close Close and save the area settings menu.

5.2.2.2 Event Handling

Please refer to 5.2.1.2 Event Handling.

5.2.2.3 Receiver Setup

Please refer to 5.2.1.3 Receiver Setup.
57
EPHD16+U Universal DVR