Table of Contents
Advertisement
Appendix A Chassis views and technical
specifications
Chassis views
Figure 38 HP FlexFabric 5930-32QSFP+/HP FlexFabric 5930-32QSFP+ TAA front panel
(1) QSFP+ port
(3) System status LED (SYS)
Figure 39 HP FlexFabric 5930-32QSFP+/HP FlexFabric 5930-32QSFP+ TAA rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Serial console port
(5) Fan tray slot 2
(7) Power supply slot 2
(9) USB mini console port
(11) ACT LED for the management Ethernet port
The HP FlexFabric 5930-32QSFP+/HP FlexFabric 5930-32QSFP+ TAA switch comes with the power
supply slots empty and the filler modules for the slots as accessories. You can install one or two power
supplies for the switch as needed. In
information about installing and removing the power supply, see
The HP FlexFabric 5930-32QSFP+/HP FlexFabric 5930-32QSFP+ TAA switch also comes with the fan
tray slots empty. You must install two fan trays for the HP FlexFabric 5930-32QSFP+/HP FlexFabric
5930-32QSFP+ TAA for adequate heat dissipation, and their models must be the same. In
LSWM1HFANSC fan trays are installed. For more information about installing and removing the fan tray,
see
"Installing/removing a fan
(2) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power supply slot 1
(8) USB port
(10) LINK LED for the management Ethernet port
Figure
39, two 650W AC power supplies are installed. For more
tray."
39
"Installing/removing a
."
Figure
39, two
Advertisement
Table of Contents
