Installing And Configuring The Acl Tape Drive For The Nonstop S-Series Server; Configuration Overview; Installation; Configuration - HP M8502 Installation And User Manual

A
Installing and Configuring the ACL
Tape Drive for the NonStop S-Series
Server
This section includes:

Configuration Overview

Installation

Configuration

Configuration Overview
The tape drive can be attached to a NonStop S-series server via an IOAM enclosure.
The tape drive attaches to the FCSA (Fibre Channel ServerNet adapter) in the IOAM
enclosure. The ServerNet switch board in the IOAM enclosure connects to a MSEB
(modular ServerNet expansion board) on a NonStop S-series server via a fiber-optic
cable. Figure A-1
connected to a NonStop S-series server via an IOAM enclosure.
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-003
on page A-2 shows a configuration example of the tape drive
A-1
A-3
A-11
A- 1