Installation - HP M8502 Installation And User Manual

Hide thumbs Also See for M8502:

Table of Contents

Installing and Configuring the ACL Tape Drive for the

NonStop NS-Series Server

Installation

1. Connect one end of the fiber cable to the top Fibre Channel port at the rear of the

tape drive. See

Figure 3-2. Tape Drive's Fibre Channel Port Connection

2. Connect the other end of the fiber cable to the Fibre Channel ServerNet adapter

(FCSA) on the NonStop NS-series server. See

location.

An LC-LC fiber-optic cable must be used to connect the ACL tape drive to the

FCSA.

Figure 3-3

Table 3-1. Fiber Cables

Connector

LC - LC

M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-003

Figure 3-2

for the location.

on page 3-4 shows each side of the cable.

Fiber Cable

50/125 µm

62.5/125 µm

3 -3

Fiber Cable

Figure 3-4

on page 3-5 for the

Fiber Cable Distance

2-300 meters (6.56-984.25 feet)

3-150 meters (9.84-492.13 feet)

Installation

Table of Contents

M8501