HP M8502 Installation And User Manual page 62

Troubleshooting
Table 6-2. Fault Symptom Codes
Message
Picker Jammed 11
Picker Jammed on
Stow
Picker retries
Exceeded 1
Picker Retries
Exceeded 3
Picker Retraction
Error
Shuttle Jammed
Rotary Jammed
Shuttle on Wrong Side
Of The Rotary
Pass through Elevator
Jammed
Vertical Elevator
Jammed
All Slots Empty
DLT Already Loaded
Expired Clean'g Cart
Not a Clean'g Cart
DLT Time-out Error
move Command Fail
Clean Operation
Time-out
Drive Status Fail
Command response
from unexpected
source
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-003
FSC ERP
310B C, G
310F C, G
3111 C, G
3113 C, G
3115 C, G
3200 C, G
3300 C, G
3301 C, G
3400 C, G
3500 C, G
5011 F
5014 F
5015 F
5016 F
5035 C, D, G
503B F
503C F
503D F
7001 D, G
6 -8
Fault Symptom Codes (FSCs)
The picker jammed during a drive fetch
operation.
The picker jammed on a stow operation.
Picker retries exceeded during a pass-
thru fetch operation.
Picker retries exceeded during a bin stow
operation.
The picker did not retract during a bin
check operation.
The shuttle could not reach the target
location.
The rotary track could not reach the target
location.
The zone indicators show that the shuttle
is backwards on the rotary track during
power-up initialization.
The pass-thru shuttle could not reach the
target location.
The vertical elevator could not reach the
target location
There are no cartridges installed in any of
the reserved cleaning slots.
The cleaning operation failed because the
drive already has a cartridge inserted.
The cleaning operation failed due to an
expired cleaning cartridge.
The cleaning operation failed because the
loaded cartridge is not a cleaning
cartridge.
The cleaning operation failed because the
drive timed out.
A front panel move operation failed.
The cleaning operation failed because the
drive timed out.
The cleaning operation failed because the
ACL could not retrieve drive status.
A command response was received from
a task to which a command had not been
sent.