HP M8502 Installation And User Manual page 78

Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
8. Attach the power cord to the tape drive's AC power receptacle. (See
page 3-6 for the location.) Then plug the other end into an AC power outlet.
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.
9. Toggle the power switch to the on position from the rear of the unit. See
on page 3-6 for the location.
M8501 and M8502 ACL Tape Drive Installation and User's Guide —529972-003
A -10
Installation
Figure 3-5 on
Figure 3-5