Panasonic ES-TLVK6 Operating Instructions Manual page 20

Problem
The power switch cannot
be pressed.
Operating time is short
even after charging.
Makes a loud sound.
The odor is getting
stronger.
You do not get as close a
shave as before.
20
ES-TLVK6_ASIA.indb 20
Action
Unlock the power switch.
Apply oil.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Apply oil.
Confirm that the blades are
properly attached.
The shaver makes a high-pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Clean the system outer foil with
the brush.
This can be improved by cleaning
every time after shaving.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
Problem
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Depending on the beard
The shaving sensor does thickness, the shaving sensor
not respond. may not react and the driving
sound may not change. This is not
abnormal.
Apply oil. The shaving sensor may
not respond when there is not
enough oil on the blades.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 15.)
The shaving sensor
responds even though the
Replace the system outer foil and/
shaver is not in contact
or inner blades.
with the skin.
Expected life of system outer foil
and inner blades:
System outer foil:
Inner blades:
Gently wipe the main body rear
The shaver cannot be terminals and the charging
charged with the self- terminals of the self-cleaning
cleaning recharger. recharger with a cloth or tissue
dampened with water.
Action
Approximately 1 year
Approximately 2 years
2015/06/08 13:23:06