Panasonic ES-TLVK6 Operating Instructions Manual page 17

►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
►Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES-TLVK6
Special Detergent for Shaver Cleaning & Charging
System
ES-TLVK6_ASIA.indb 17
) and the
2
1
1
System outer foil WES9173
Inner blades WES9170
WES4L03
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self-cleaning recharger. Follow the steps below to remove them.
1
We recommend doing this each time you change the cleaning
liquid.
1. Be sure to remove the cleaning liquid unit
and the appliance plug from the self-
cleaning recharger.
• Be careful not to spill the cleaning liquid.
• Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
• You can clean with the
cleaning liquid filter removed.
• After washing, be sure to
attach the cleaning liquid
filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened with
water.
• Clean the corners and uneven parts of the
cleaning tray with a cotton swab
dampened with water.
17
2015/06/08 13:23:05