Advertisement

IM-B094-01
Operating Instructions
Rechargeable Shaver
Model No. ES-LA83
Before operating this unit, please read these instructions completely and save them for future use.

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic ES-LA83

  • Page 1 IM-B094-01 Operating Instructions Rechargeable Shaver Model No. ES-LA83 Before operating this unit, please read these instructions completely and save them for future use.
  • Page 2 Treat yourself to wet lather shaves for at least three weeks and bend the power cord or wrap it around the shaver. This notice the difference. Your Panasonic WET/DRY shaver requires appliance is not intended for use by persons (including children)
  • Page 3: Specifications

    Protective cap Trimmer handle SPECIFICATIONS Outer foil section Adaptor (RE7-51) Power source: See the name plate on the product. Foil frame Power cord (Automatic voltage conversion) System outer foil Appliance plug Motor voltage: 3.6 V DC System outer foil release Self-cleaning recharger Charging time: 1 hour buttons...
  • Page 4 while until it glows. to the adaptor, when not using it to maintain full battery capacity. • Depending on the environment, the shaver may not dry even if You cannot overcharge the shaver. you select a course that includes the “Dry” function. In this case, Charging without the self-cleaning recharger wipe off any drops of water with a dry cloth.
  • Page 5: About The Lcd Panel

    About the LCD panel Using the shaver The LCD panel shows the remaining battery capacity from 0% to 100%, in 10% increments. 10 minutes after After charging is While charging charging is completed completed 90˚ The indicators The indicators blink Slide the switch lock Hold the shaver as The indicators...
  • Page 6 • • Replace the detergent cartridge when the status lamp is Only use self-cleaning recharger detergent for Panasonic shavers. • illuminated. Use the below chart as a guide. Always change the detergent cartridge and the cleaning liquid in the water tank at the same time.
  • Page 7 Cleaning the shaver Course Time required (guide) Course selection [In the low Insert the appliance plug. indications temperature] Plug in the adaptor. Charge Charge (0 to 60 min) • Remove any soap or water on the shaver if it has been washed with hand soap or any Clean (10 min) other detergent.
  • Page 8 Follow the steps outlined below if the status lamp blinks or Cleaning the shaver without the self-cleaning glows during the “Clean/Dry/Charge” course. recharger Blinks Glows Correctly set the Remove the shaver from the self- We recommend that you clean detergent cartridge and cleaning recharger and then your shaver with the self-cleaning then restart a course.
  • Page 9 7. Dry the outer foil section and Replacing the system outer foil and the inner the shaver completely. 8. Attach the outer foil section to blades the shaver. appears on the LCD panel once a year. (This will differ 9. Lubricate the shaver. depending on usage.) We recommend checking the system outer foil and the inner blades when it appears.
  • Page 10: Cleaning With The Brush

    Replacing the inner blades Cleaning the self-cleaning recharger 1. Press the foil frame release buttons and lift the outer foil Beard trimmings may become attached to the cleaning tray of the section upwards as illustrated. self-cleaning recharger. Follow the steps below to remove them. 2.
  • Page 11: Removing The Built-In Rechargeable Battery

    When the water does not drain from the cleaning For environmental protection and recycling of materials tray This shaver contains a Lithium-ion battery. Beard trimmings may clog the Please make sure that the battery is disposed of at an officially drain at the bottom of the assigned location, if there is one in your country.
  • Page 12 Panasonic Electric Works Co., Ltd. http://panasonic.net Printed in Japan ES0000LA000X X0009-0...

Table of Contents