Table of Contents
Advertisement
USER GUIDE
USER GUIDE
Terminal modes
Toggling between Pointing mode and Standby mode
is done using the Activate button.
Battery
Pointing mode
The Terminal enters the pointing mode automatically
when powered on. The terminal exits pointing when
pressing Activate or registering onto the Inmarsat
BGAN Network via BGAN LaunchPad or the ISDN
Handset.
The buzzer in the Antenna Unit is active when in
pointing mode.
The buzzer can be turned off/on, or its level adjusted
from LaunchPad or the ISDN Handset.
EXPLORER 100/110
Activate
Signal
Bluetooth
Message
Standby mode
In this mode the terminal logs onto the Inmarsat
BGAN system and becomes operational.
When charging the battery indoors with no intention
to operational, you can exit the Pointing mode (turn
off the sound) by switching to Standby mode.
Toggle between Pointing mode and Standby mode by
pressing the Activate button.
Sleep mode
Sleep mode is a state the terminal enters after 10 sec-
onds in Standby mode, when logged onto the Inmar-
sat BGAN system and running on batteries only.
The terminal will wake up when activities occur like:
• Incoming calls / incoming SMS
• When using BGAN LaunchPad / the ISDN Handset.
• Making a call / sending SMS.
• Loosing satellite signal / alarm ocurred.
In sleep mode only the battery indicator is ON.
OPERATION
'
CONT
D
17
17
Advertisement
Table of Contents
Need help?
Do you have a question about the EXPLORER 110 and is the answer not in the manual?
Questions and answers