32224-BGAN-exp500-manual-120x180 24/10/05 13:39 Side 2 EXPLORER 500 GETTING STARTED...
Page 2
32224-BGAN-exp500-manual-120x180 24/10/05 13:40 Side 3...
Page 3
32224-BGAN-exp500-manual-120x180 24/10/05 13:41 Side 4 GETTING STARTED ™ Congratulations on the purchase of your EXPLORER 500. Before you start, please check that the following items are present: • EXPLORER ™ 500 terminal • Battery • AC/DC adapter and power cable for European mains system •...
Page 4
32224-BGAN-exp500-manual-120x180 24/10/05 13:41 Side 5 Connect the cables Connect the cable(s) to the relevant ™ connector(s) on the EXPLORER 500. The connector panel is located on Phone/Fax Power ™ the side of the EXPLORER 500. Two connectors are placed at the back of the EXPLORER™ 500: External antenna connector, marked ANT, and Bluetooth phone charging connector, marked DC OUT.
Page 5
32224-BGAN-exp500-manual-120x180 24/10/05 13:41 Side 6 Use the displayed signal strength and the pointing sound to find the highest ™ possible signal strength, while slowly rotating and tilting the EXPLORER 500. b. Press OK when you have obtained the highest possible signal strength.
Page 6
32224-BGAN-exp500-manual-120x180 24/10/05 13:41 Side 7 ™ MAKING A CALL FROM THE EXPLORER ™ To make a call from a phone connected to the EXPLORER 500, dial: 00 <country code> <phone number> followed by # or off-hook key. Example: To call Thrane & Thrane in Denmark: (+45 39 558800), dial: 00 45 39 558800 followed by # or off-hook key.
Page 7
32224-BGAN-exp500-manual-120x180 24/10/05 13:41 Side 8 MAKING A LAN CONNECTION To make a LAN connection, simply connect the LAN cable between your data unit ™ and the LAN connector, and start up the EXPLORER 500 as described in the begin- ning of this document. ™...
Need help?
Do you have a question about the EXPLORER 500 and is the answer not in the manual?
Questions and answers