Sar Compliance - Datalogic DL-Axist User Manual

Safety and Regulatory Information

SAR Compliance

This product has been tested and found to comply with the following
standards:
• IEEE1528-2013: IEEE Recommended Practice for Determining
the Peak Spatial-Average Specific Absorption Rate (SAR) in the
Human Head from Wireless Communications Devices:
Measurement Techniques.
• EN 62311:2008: assessment of electronic and electrical
equipment related to human exposure restrictions for
electromagnetic fields (0 Hz – 300 GHz).
• EN 62479:2010: Assessment of the compliance of lower power
electronic and electrical equipment with the basic restrictions
related to human exposure to electromagnetic fields (10 MHz
to 300 GHz).
• RSS102 Issue 5: Radio Frequency (RF) Exposure Compliance of
Radiocommunication Apparatus (All Frequency Bands).
• EN50360:2001/A1:2012: Product standard to demonstrate the
compliance of mobile phones with the basic restrictions
related to human exposure to electromagnetic fields (300MHz
– 3GHz).
• EN50566:2013:
compliance of radio frequency fields from handheld and
body-mounted wireless communication devices used by
general public (30MHz – 6GHz).
• EN62209-1:2006; Human exposure to radio frequency fields
from hand-held and body-mounted wireless communication
devices - Human models, instrumentation, and procedures -
Part 1: Procedure to determine the specific absorption rate
(SAR) for hand-held devices used in close proximity to the ear
(frequency range of 300 MHz to 3 GHz).
234
Product standard to demonstrate the
DL-Axist™