Near Field Communication (Nfc); Read Nfc Tags - Datalogic DL-Axist User Manual

Connections

Near Field Communication (NFC)

NFC technology allows short-range, wireless data transfer between
the terminal and NFC tags or other NFC enabled devices placed in
close proximity to the back of the terminal.
DL-Axist support the following modes of operation:
• NFC tag reader/writer mode: the terminal reads and/or writes
digital information from or to an NFC tag.
• Peer-to-Peer (P2P) mode: the terminal uses Android Beam
and/or Bluetooth@ technology to transfer screen content
(e.g., a picture, web page url, or file) between NFC enabled
devices.
• NFC card emulation mode - The terminal emulates an NFC
card (smart card) that an external card reader can access.

Read NFC Tags

1. Make sure NFC is enabled (see
2. Hold the NFC tag close to the back of the terminal.
3. When an NFC tag is recognized, the terminal emits a sound and
the tag data displays on the terminal screen.
See also "Tap2Deploy (NFC)" on page -32
page -158.
Suspend mode and the screen lock temporarily turns the
NFC radio off.
NOTE
192
"Enable NFC" on page
and
-77).
"Tap2Deploy" on
DL-Axist™