Fcc Compliance; Sar Compliance - Datalogic Jet User Manual

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference which may
cause undesired operation.
FCC ID U4G0019.
All DLBJET™ 5XX-XXX-XXX Wi-Fi models contain FCC ID H9PLA4137.
All DLBJET™ 7XX-XXX-XXX Wi-Fi models contain FCC ID TWG-SDCCF10G.
All DLBJET™ GSM models contain FCC ID QIPMC55.
All DLBJET™ RFID models contain FCC ID U4G0023.

SAR COMPLIANCE

This product has been tested and found to comply with the following standards:
- EN50360: product standard to demonstrate the compliance of mobile phones with the
basic restrictions related to human exposure to electromagnetic fields (300 MHz – 3 GHz).
- EN50361: basic standard for the measurement of specific absorption rate related to
human exposure to electromagnetic fields from mobile phones (300 MHz – 3 GHz).
- OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC guidelines
for human exposure to radio frequency electromagnetic fields.
- Australian Radiation Protection And Nuclear Safety Agency (ARPANSA): radiation
protection series publication No. 3: maximum exposure levels to radio frequency
fields 3 KHz TO 300 GHz.
xiv