Datalogic DL-Axist User Manual page 148

Datalogic Applications
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Clear the "Enable Service" check box.
You must clear "Enable Service" before you can change
any setting in DXU Agent.
NOTE
6. Select the "Is Authentication Required" check box.
7. Select the "Enable Service" check box.
8. Clean up by tapping the Home button.
To authenticate while opening DXU Agent's Settings window:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button to display the menu.
4. Tap the Settings button.
5. Type your password into the "Enter Password" field, and then
tap the OK button.
140 DL-Axist™