Datalogic DL-Axist User Manual page 154

Datalogic Applications
2. Click the "Device Info" button.
3. Click the Back button (a leftward pointing arrow in a circle) to
return to DXU's main view).
View Device Info Recorded in a Configuration File
You can view information about the device from which a
configuration file was extracted. This information includes the
capabilities of the device's Wi-Fi radio, the type of barcode scanner it
has, the OS version, the battery's type and state of charge, the
firmware version, and the version of the Datalogic Enterprise SDK.
To view information about the device from which a configuration file
was extracted:
1. Open a configuration file or load the configuration from a
connected device.
2. Click the "Device Info" button.
3. Click the Back button (a leftward pointing arrow in a circle) to
return to DXU's main view).
Remote Control
Remote Control lets you see what is displayed on the screen of a
connected device. This window also includes buttons to remotely
activate the device's external buttons, and to capture a screen shot of
what is visible on its screen. Note that clicking a button on screen
does not physically press a button, or even trigger it electrically, but
instead sends an event message in the system as if you had pushed
a physical key or tapped a physical button on the touch screen.
Remote Control works through the magic of software.
146 DL-Axist™