Datalogic DL-Axist User Manual page 153

12. To print, click the "Print Preview" button, then click the Print
button in the button bar, and then finish printing using your
printer's Print dialog.
To apply the configuration by scanning the Scan2Deploy barcodes:
1. Resume your device and unlock its screen.
2. Launch the DXU Agent application.
3. Tap the Menu button, and then select the Scan2Pair command.
4. Scan any label in your Scan2Deploy label set.
Some configurations are small enough to fit on only one
barcode label, and others may have many barcodes to
scan.
NOTE
5. Continue to scan all barcodes until all of them on the list on the
screen indicate they have been scanned. Once the last label is
scanned, the configuration will be put into effect, and an
on-screen notification will confirm that your configuration is
complete.
6. Clean up by tapping the Home button.
View Device Info for a Connected Device
You can view information about a device that is connected to DXU.
This information includes the capabilities of the device's Wi-Fi radio,
the type of barcode scanner it has, the OS version, the battery's type
and state of charge, the firmware version, and the version of the
Datalogic Enterprise SDK.
To view information about the device you are connected to:
1. Load the configuration from a connected device.
User's Manual
Datalogic Applications
145