Datalogic DL-Axist User Manual page 225

The following information is provided to comply with the rules
imposed by international authorities and refers to the correct use of
your device.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH
21 CFR 1040 and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open
the device.
WARNING
WARNING
The product utilizes a low-power laser diode. Although staring
directly at the laser beam momentarily causes no known biological
damage, avoid staring at the beam as one would with any very
strong light source, such as the sun. Avoid shining laser light into
any person' s eye, even through reflective surfaces such as mirrors,
etc.
User's Manual
ENGLISH
Do not attempt to open or otherwise service any
components in the optics cavity. Opening or servicing
any part of the optics cavity by unauthorized
personnel may violate laser safety regulations. The
optics system is a factory only repair item.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in exposure to hazardous visible laser light.
Safety and Regulatory Information
217