Output Screen - Yamaha RACK Reference Manual

OUTPUT screen

Allows you to configure how output channels will be output. The buttons displayed vary
depending on the type of output channel selected.
Output channel
SUB button
ST button
SUB slider
AUX 1–8 – –
○ ○
AUX9/10–AUX19/20
SUB – –
STEREO – –
MATRIX1–4 – –
○
: Displayed
– : Not displayed
1
ST button
Determines whether the stereo channel is output or not.
2
SUB button (V3.0 and later)
Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus.
3
SUB slider (V3.0 and later)
Determines the amount of signal sent from the selected channel to the SUB bus.
Buttons
Out Gain OMNI OUT OMNI OUT
Φ button
Buttons Indicator Buttons
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
4
Out Gain text box
Allows you to adjust the output gain.
When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch
again to display the keyboard and enter a value.
5 Φ (phase) button
Allows you to reverse the phase.
When turned on, the output signal's phase is reversed.
6
OMNI OUT button
Displays the number of the OMNI OUT to which the channel is directed.
Up to two numbers can be displayed. For three or more numbers, "+" is displayed.
Displays the OMNI OUT screen.
For information about channels and output ports, see "Quick Config Input and input
channel relationships" (page
7
Recall Safe button (V1.1 and later)
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.
- 73 -
Configuration screens
(page 22)
91).
TF Series
Reference Manual