Checking The Input Signals - Yamaha RACK Reference Manual

4
Delay button
Delays the monitor signal.
5
Monitor output button
Turns the monitor output on and off.
The signal is output from the [PHONES] jack regardless of this setting.
6
Monitor level meter
Displays the monitor level.
7
Monitor level slider
Adjusts the monitor output level.
The signal is output from the [PHONES] jack regardless of this setting.
8
Clear CUE button
Cancels all cue selections.
9
Delay setting
Determines the delay time by specifying distance (meters or feet) or time (milliseconds).
Touch a text box to display the keyboard and enter a value.
0
Monitor selection buttons
Allow you to select the sources that will be monitored.
TF5/TF3/TF1
TF-RACK

Checking the input signals

1. Touch a CUE mode button to select
the desired cue mode.
2. Select the desired monitor sources by
touching the corresponding monitor
selection buttons.
3. Select the desired cue point by
touching the corresponding CUE
point selection button.
4. Touch the monitor output button to
turn the monitor output on and off.
5. Drag the monitor level slider to adjust
the monitor level.
(page 10)
6. Select the desired delay time.
Touch one of the delay setting text boxes to
display the keyboard. You can set the delay
time by specifying distance (meters and feet)
or time (milliseconds).
7. Touch the delay button.
The delay is turned on.
- 19 -
Toolbar
Monitor level
slider
Delay button
Delay setting
Text boxes
TF Series
Reference Manual