Yamaha RACK Reference Manual page 29

USER DEFINED CONTROLS screen
This screen allows you to assign features to the [USER DEFINED KEYS], [USER DEFINED
KNOBS], and to the footswitch.
1
Keys button
Allows you to assign features to the [USER DEFINED KEYS] on the top panel.
2
Key setup buttons (A–F)
Touch the desired button to display the screen that allows you to assign features to the
corresponding key.
Features that can be assigned to [USER DEFINED KEYS]
FUNCTION PARAMETER1 PARAMETER2
No Assign
Brightness Bank Change
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
CH ON Specific CH
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
MATRIX1–4 (V2.5 and later)
Description
No feature is assigned
Switches the brightness setting bank. This
feature is supported from V1.1.
Turns the channel assigned to PARAMETER 2
on and off.
- 29 -
FUNCTION PARAMETER1 PARAMETER2
Inc
Dec
CH 1–40,
ST IN 1L–ST IN 2R
FX1L–FX2R,
CH Select
AUX 1–8,
Specific CH
AUX 9–20,
STEREO L, STEREO R,
SUB
MATRIX1–4 (V2.5 and later)
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
CUE Specific CH
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
MATRIX1–4 (V2.5 and later)
FX 1, FX 2,
Effect Bypass
INS FX 1–6
HPF, LPF, Low, Low-Mid,
EQ Band Select
High-Mid, High
Help
Meter Peak Hold ON
Output
STEREO, SUB,
STIN 1, STIN 2,
Monitor
Source Select STIN (TF-RACK),
USB 33/34,
Playback
Oscillator On
AUX 1–20,
Oscillator
Specific CH STEREO L, STEREO R,
SUB
Bookmark
Page Change
Bookmark with
"SEL"
Close Popup
Play/Pause
Stop
Next
Recorder Transport Previous
Rec
Auto Rec
Rec & Start
Toolbar
Description
Select channels in order of the direction
selected for PARAMETER 1.
Selects the channel assigned to PARAMETER 2.
Turns the cue on and off for the channel
assigned to PARAMETER 2.
Bypasses the effect assigned to PARAMETER 2.
Selects the band assigned to PARAMETER 2.
(V3.0 and later)
Displays help information.
Turns the peak hold on and off.
Turns the monitor out on and off.
Selects the monitor source assigned to
PARAMETER 2.
Turns the oscillator on and off.
Turns the oscillator sent to the channel
assigned to PARAMETER 2 on and off.
Press and hold for more than 2 seconds to
bookmark the current screen. Press and hold
for less than two seconds to display the
bookmarked screen.
The selected channel is saved with the
bookmark. Same as above.
Closes the popup screen.
Same as the Play/Pause button on the
RECORDER screen.
Same as the Stop button on the RECORDER
screen.
Same as the Next button on the RECORDER
screen.
Same as the Previous button on the
RECORDER screen.
Same as the Rec button on the RECORDER
screen.
Recording stops and the file is saved, and then
recording resumes immediately as a new file.
Recording starts immediately without entering
record-ready mode.
TF Series
Reference Manual