Yamaha RACK Reference Manual page 31

Features that can be assigned to the footswitch
FUNCTION PARAMETER1 PARAMETER2
No Assign
Brightness Bank Change
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
CH ON Specific CH
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
MATRIX1–4 (V2.5 and later)
Inc
Dec
CH 1–40,
ST IN 1L–ST IN 2R,
FX1L–FX2R,
CH Select
AUX 1–8,
Specific CH
AUX 9–20,
STEREO L, STEREO R,
SUB
MATRIX1–4 (V2.5 and later)
Clear Cue
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
CUE Specific CH
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
MATRIX1–4 (V2.5 and later)
FX 1, FX 2,
Effect Bypass
INS FX 1–6
HPF, LPF, Low, Low-Mid,
EQ Band Select
High-Mid, High
Help
Meter Peak Hold ON
Output
STEREO, SUB,
ST IN 1, ST IN 2,
Monitor
Source Select STIN (TF-RACK),
USB 33/34,
Playback
Input
Mute Master
FX
Oscillator On
AUX 1–20,
Oscillator
Specific CH STEREO L, STEREO R,
SUB
Bookmark
Page Change
Bookmark with
"SEL"
Close Popup
Description
No feature is assigned
Switches the brightness setting bank. This
feature is supported from V1.1.
Turns the channel assigned to PARAMETER 2
on and off.
Select channels in order of the direction
selected for PARAMETER 1.
Selects the channel assigned to
PARAMETER 2.
Clears all cue selections.
Same as the CLEAR CUE key on the top panel.
Turns the cue on and off for the channel
assigned to PARAMETER 2.
Bypasses the effect assigned to PARAMETER 2.
Selects the band assigned to PARAMETER 2.
(V3.0 and later)
Displays help information.
Turns the peak hold on and off.
Turns the monitor out on and off.
Selects the monitor source assigned to
PARAMETER 2.
Same as the corresponding MUTE key on the
top panel.
Turns the oscillator on and off.
Turns the oscillator sent to the channel
assigned to PARAMETER 2 on and off.
Press and hold for more than 2 seconds to
bookmark the current screen. Press and hold
for less than two seconds to display the
bookmarked screen.
The selected channel is saved with the
bookmark. Same as above.
Closes the popup screen.
- 31 -
FUNCTION PARAMETER1 PARAMETER2
Play/Pause
Stop
Next
Previous
Recorder Transport
Rec
Auto Rec
Rec & Start
Inc
Dec
Store
Recall
Inc Recall
SCENE
Dec Recall
Direct Recall/ A00–99,
Store B00–99
TAP TEMPO
Feature assignment screen
When you select a Function, the items available for Parameter 1 are displayed. Likewise,
when you select an item for Parameter 1, the items available for Parameter 2 are
displayed. Some Functions may not have items available for Parameter 1; some
Parameter 1 items may not have items available for Parameter 2.
Toolbar
Description
Same as the Play/Pause button on the
RECORDER screen.
Same as the Stop button on the RECORDER
screen.
Same as the Next button on the RECORDER
screen.
Same as the Previous button on the
RECORDER screen.
Same as the Rec button on the RECORDER
screen.
Recording stops and the file is saved, and
then recording resumes immediately as a new
file.
Recording starts immediately without
entering record-ready mode.
Same as the INC, DEC, STORE, and RECALL
keys.
Recalls the next numbered Scene.
Recalls the previous numbered Scene.
Recalls the Scene number assigned to
PARAMETER 2. Press and hold for more than
two seconds to assign the current settings to
that Scene number.
Same as the TAP key on the top panel.
TF Series
Reference Manual