Splitting The Clips Freely (Clip Cutter Trig); Dual Rec - JVC GY-HM600E Instructions Manual

Splitting the Clips Freely
(Clip Cutter Trig)
You can split the clips freely without having to stop
recording during shooting.
1 Assign the "Clip Cutter Trig" function to
any of the user buttons.
(A P38 [Assigning Functions to User Buttons] )
2 Press the user button that is assigned with
"Clip Cutter Trig" during shooting.
[CLIP CUT] appears on the display screen and
the clip is split.
REC
100min
50min
CLIP CUT
4030 20 10 0
Memo :
Clips cannot be split again for a few seconds
0
after the operation is performed.
This item cannot be used when [Slot Mode] is
0
set to "Backup".
(A P73 [Backup Rec] )
This item cannot be used when [Rec Mode] is
0
set to a value other than "Normal" or "Pre Rec".
(A P110 [ Rec Mode ] )
The split clips are recorded seamlessly without
0
interruptions in the video.
00: 00: 00.00
Jan 24 , 2012
12 :34 :56
CLIP CUT
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
P 13000K 1/ 100

Dual Rec

If both the slots are loaded with recordable cards
0
in the factory default ([Slot Mode] is set to
"Series"), pressing the [REC] button starts
recording only to the media in the selected slot.
When the remaining space in the selected
media runs out, recording continues by
automatically activating the media in the other
slot.
If both the slots are loaded with recordable cards
0
in the Dual Rec mode ([Slot Mode] is set to
"Dual"), pressing the [REC] button starts
recording simultaneously to the media in both
the slots.
The clips recorded to the media in both the slots
0
are identical, and two clips of the same content
can be created only on this camera recorder.
(A P111 [ Slot Mode ] )
REC
HOLD
A
B
71