JVC GY-HM600E Instructions Manual page 64

Memo :
Drop frame/non-drop frame mode
When the frame rate setting in [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is "60p", "60i", or "30p", the
actual number of frames per second is
approximately 59.94 (29.97). However, the time
code processing standard is "60p", "60i", or
"30p" frames. To make up for the frame number
discrepancy, the drop frame mode (Drop) drops
the 00 frame and 01 frame every minute except
for minutes that are multiples of 10. However, in
the case of "60p", the 00, 01, 02 and 03 frame
are dropped.
The non-drop frame mode (Non Drop) does not
0
drop frames and ignores the discrepancy with
the actual time.
Setting Time Code
MENU/THUMB
AE LEVEL
CANCEL
1 Select [Main Menu] B [TC/UB] B [TC
Preset] and press the Set button (R).
(A P101 [ TC Preset ] )
The [TC Preset] screen appears.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
(A P100 [ TC Generator ] )
64
MENU/THUMB
CANCEL
OIS / 2 LOLUX / 3
1
2 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
During drop frame
Memo :
Press the [OIS/2] button to reset each digit to "0".
0
The cursor moves to the time digit (left).
3 Check the values and press the Set button
(R).
The time code is set and the screen returns
0
to [TC/UB].
To cancel the setting, press the [CANCEL]
0
button.
4 Press the [MENU] button.
Returns to the normal screen.
Presetting the User's Bit
You can add an 8-digit hexadecimal number as the
user's bit to the recorded image.
MENU/THUMB
AE LEVEL
CANCEL
Cursor
During non-drop
frame
MENU/THUMB
CANCEL
OIS / 2 LOLUX / 3