JVC GY-HM600E Instructions Manual page 111

Slot Mode
For setting the operation of the card slot.
Series:
0
Mode that activates the two slots sequentially.
Dual:
0
Mode that activates the two slots at the same
time.
(A P71 [Dual Rec] )
Backup:
0
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [Rec Mode] is set to "Normal".
Start or stop the recording using the [Backup
Rec] menu or press the [USER1] to [USER7],
[LCD KEY▲], [LCD KEY▶], [LCD KEY▼], [LCD
KEY◀] that is assigned with "Backup Trig".
(A P73 [Backup Rec] )
Memo :
When this is set to "Series", and recordable
0
media are inserted in both slots, pressing the
[REC] button starts recording only to the card in
the selected slot (active slot).
When "Series" is selected, and [Record
0
Format] B [Format] is set to "AVCHD", the clips
are recorded over the slots seamlessly without
interruption in the video.
When this is set to "Dual", and recordable media
0
are inserted in both slots, pressing the [REC]
button starts simultaneous recording to the
cards in both slots.
9 Backup Rec
For starting/stopping backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to "Backup".
Memo :
When recording is stopped due to no remaining
0
space on the media, etc., this item is fixed at
"STOP" and cannot be selected.
Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
The date/time display style can be changed in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
(A P104 [ Date Style ] )
(A P104 [ Time Style ] )
When the date/time is hidden while the menu
0
screen, status screen or other screen is
displayed, the date/time during this period will
not be recorded to the video. A confirmation
screen appears if you try to display the menu
screen or status screen during recording.
Clip Set
9 Clip Name Prefix
For setting the first four characters of the name of
the clip file to be recorded to the SD card.
Enter any of the 38 characters including alphabets
(upper case), numbers (0 to 9), "_" (underscore),
and "-" (hyphen) using the software keyboard.
(A P91 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
Memo :
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [Format] is set to
"AVCHD", this setting is not reflected in the file
name of the clip.
However, it is recorded as the display name of
the clip in the thumbnail display.
9 Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (R) to reset
the number.
When [Format] is set to "AVCHD", the clip number
is reset to "00000".
When other clips exist on the SD card, the smallest
available number is used after reset.
Example:
0
If the [Clip Name Prefix] is "ABCD", and
"ABCD0001" already exists on the SD card,
"ABCD0002" will be assigned.
111