JVC GY-HM600E Instructions Manual page 58

Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
Press the [WHT BAL] button on the side control
0
panel to enter into Automatic White Balance
mode.
"<FAW>" appears on the screen.
0
Set the [FULL AUTO] switch on the camera
0
recorder to "ON" to enter Automatic White
Balance mode. An appropriate white balance is
automatically adjusted according to the color
temperature of the lighting on the object.
White balance switching with the [WHT BAL
0
B/A/PRESET] selection switch is disabled.
4030 20 10 0
FAW
Caution :
The accuracy of [FAW] is inferior to that of Auto
0
White Balance.
When the power of the camera recorder is
0
turned on with the [FAW] mode selected, it takes
about 15 seconds for the colors to stabilize.
Memo :
When [Main Menu] B [Camera Function] B
0
[User Switch Set] B [AE Lock] is set to "AE/WB",
the white balance when the user button that is
assigned [AE Lock] is pressed can be fixed.
(A P96 [ AE Lock ] )
If [White Balance] has been assigned to the user
0
button, pressing the assigned user button will
display the FAW Paint Adjustment screen.
(A P38 [Assigning Functions to User Buttons] )
58
00: 00: 00.00
Jan 24 ,2012
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
FAW
0
dB
F1.6
1/ 100
FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1 Select [Main Menu] B [Camera Process]
B [White Balance] B [FAW Paint] and press
the Set button (R).
The FAW Paint Adjustment screen appears.
2 Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
3 Press the Set button (R).
Returns to the [White Balance] screen.
1
R Value
B Value