JVC GY-HM600E Instructions Manual page 119

T Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings]
B [Date Style]/[Time Style].
(A P104 [ Date Style ] )
(A P104 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
(A P104 [ Date/Time ] )
When [Main Menu] B [System] B [Record
0
Set] B [Time Stamp] is set to "On", this item is
not displayed.
(A P111 [ Time Stamp ] )
U Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to 99)
0
Memo :
You can specify the display method (Number/
0
Bar) and whether to turn off the display in [LCD/
VF] B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P103 [ Zoom ] )
Displayed in the Display 0 screen only when
0
there is a change.
V Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
※
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E D D 2 0
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in
[LCD/VF] B [Display Settings] B [TC/UB].
This item will not be displayed when "Off" is
selected.
(A P104 [ TC/UB ] )
W Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
(A P66 [Synchronizing Time Code on Another
Camera] )
X Event/Warning Display Area
Displays error messages.
(A P133 [Error Messages and Actions] )
119