Focus Assist Function - JVC GY-HM600E Instructions Manual

Adjusting Focus Automatically
Set the [FOCUS AUTO/MANU/∞] switch to
"AUTO".
The auto focus icon e appears on the screen.
Memo :
If [AF Assist] is set to "On", you can temporarily
0
adjust the focus manually by turning the focus
ring when in the automatic focus adjustment
mode.
(A P94 [ AF Assist ] )
If [Main Menu] B [LCD/VF] B [Display Settings]
0
B [Focus] is set to "Off", the auto focus icon will
not appear.
(A P103 [ Focus ] )
One Push Auto Focus
While in the Manual Focus mode, pressing the
[PUSH AUTO] button (within 1 minute) makes the
camera recorder focus on the center of the frame
automatically.
Memo :
Face detection does not work during One Push
0
Auto Focus.
When the operation is complete, the camera
0
recorder returns to the Manual Focus mode
automatically.
One Push Auto Focus functions with emphasis
0
on the focusing speed. This function is not
suitable during recording.
Setting to Auto Focus Temporarily
(Push Auto Focus)
The camera recorder will shift to Auto Focus
0
mode temporarily and automatically adjusts
focus when the [PUSH AUTO] button is pressed
during shooting in Manual Focus mode.
Release the [PUSH AUTO] button to return to
0
Manual Focus mode.
Memo :
Face detection does not work during Push Auto
0
Focus.
Adjusting Focus on Far Objects
Slide the [FOCUS AUTO/MANU/∞] switch to "∞".
The ∞ icon is displayed.
0
Release your finger to return to Manual Focus
0
mode.
48

Focus Assist Function

When the [FOCUS ASSIST/1] button is pressed
0
during shooting, the focused area is displayed
in color. This enables easy and accurate
focusing.
Select the color (blue, red or green) in the menu.
0
Memo :
When [Main Menu] B [LCD/VF] B [Shooting
0
Assist] B [Focus Assist] B [Type] is set to
"ACCU-Focus", the depth of field becomes
shallower to enable easier focusing.
(A P102 [ Focus Assist ] )
The "ACCU-Focus" function switches
0
automatically to "Off" after about 10 seconds.
Select the display color in [Main Menu] B [LCD/
0
VF] B [Shooting Assist] B [Focus Assist] B
[Color].
(A P102 [ Color ] )
If you use the zebra function and the Focus
0
Assist function at the same time, it may be
difficult to see the effect of the Focus Assist. In
this case, turn off the zebra function.
Setting Focus Assist Function to a User Button
You can assign the "Focus Assist" function to a user
button.
(A P38 [Assigning Functions to User Buttons] )