Connecting The Headphone - JVC GY-HM600E Instructions Manual

* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
(A P109 [ System ] )
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to "On".
(A P105 [ Display On TV ] )
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the HD-SDI and SD-
SDI signals.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Settings for SDI Down-Converted Output
You can select the method to "down convert" HD
0
video images to SD images during SD-SDI
output.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and
"Squeeze" (full size, compressed at the left and
right).
(A P110 [ SD Aspect ] )
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
(A P109 [ System ] )
Connecting the
Headphone
Audio output from the [x] terminal can be
0
selected using [A/V Set] B [Monitor] or the
[MONITOR] selection switch on the camera
recorder.
(A P107 [ Monitor ] )
The different combinations of settings that are
0
output from the [x] terminal and monitor
speaker are as follows.
[MONITOR]
[Monitor]
Switch
Settings
Settings
[CH1] -
[BOTH] [Mix]
[Stereo]
[CH2] -
* Audio is output from the speaker only in Media
mode. Does not output in the Camera mode.
Memo :
If both CH1 and CH2 are built-in microphones,
0
stereo sound is output from the [x] terminal
regardless of the [MONITOR] switch setting and
[Monitor] setting.
[x]
terminal
Speaker *
L R
CH1 CH1
CH1+CH2 CH1+CH2
CH1 CH2
CH2 CH2
131