After Self Cleaning - Siemens HB 76P.70 S Instruction Manual

The end time is reached
Changing the end time
Clearing the end time
Cancelling the self cleaning
Calling up the time settings

After self cleaning

A signal sounds. The oven stops heating.
The ? cooking time symbol flashes in the clock
display and 0:00 is displayed as the cooking time.
You can switch off the signal earlier by pressing the
j clock button.
Switch off the oven with the @ main switch.
Press the j clock button repeatedly until the ! End
time symbol flashes in the clock display.
Change the end time using the rotary knob.
Press the OK button to confirm the change.
Press the j clock button repeatedly until the ! End
time symbol flashes in the clock display.
Reset the end time using the rotary knob until the
current time is set at which the self cleaning ends.
Press the OK button to confirm the change.
The oven starts.
Change the type of heating or switch off the oven with
the @ main switch.
The cleaning level cannot be changed.
To call up the ? Cooking time, ! End time or
j Time:
Press the j clock button repeatedly until the relevant
symbol appears in the clock display.
The value is displayed for a few seconds.
Allow the oven to cool down fully.
Then wipe away any remaining ash from inside the
oven using a moist cloth.
53