Connecting to Tactile Transducers
To Power the MQB1 Tactile Transducers
TRIGGER IN
Receiver/
Processor
Tactile Transducer
TRIGGER IN
Receiver/
Processor
MQB1
Tactile Transducers
Specifications are subject to change without notice
̶
+
MQB1
̶
+
+
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER to
70Hz (9 o'clock position).
̶
NOTE:
Make sure the front
toggle switch is set to
LOWPASS.
T h e n , s e t t h e
CROSSOVER to 70Hz
(9 o'clock position).
XJ-300ST Manual 13