Included In The Box - EarthQuake XJ-300ST User Manual

2 channel or monoblock class “j” amplifier
Hide thumbs Also See for XJ-300ST:
Table of Contents

Advertisement

Introduction
The XJ-300ST amplifier is an extremely versatile and modular amplifier. It can
be used as a two channel, 2.1 channel, or bridged as a 1 channel amplifier.
The XJ-300ST runs completely cool while outputting twice the power of most
amplifiers its size. Therefore, it is extremely flexible and can be used in many
different applications.
Multiple Mounting Options
The XJ-300ST is only one rack space tall and has a half-rack width chassis.
This smart design features a patented interlocking design so two XJ-300STs
can be connected side by side and be rack mountable. Other amplifiers of
the same size run too hot to mount them near anything else which defeats
the purpose of their size. Because the XJ-300STs run completely cool, you
can comfortably mount other components directly above or below them in
the rack. This means ultimate convenience for the installer. There are also
additional mounting holes on the sides of the amplifier so that short brackets
can be attached and the amp can be mounted directly to a wall or inside a
cabinet.
Speaker Set-up Options
One or two XJ-300STs can power a 2.1 channel system. This depends on
how much power you want to output to your speakers. One XJ-300ST can
be used for two speakers while the other can be bridged as a monoblock.
Alternatively, you can use two linked XJ-300STs as a 4 channel system. For
a more high powered system, bridge both of them and designate one speaker
or sub to one amplifier and another speaker or sub for the other. The installer
is completely in charge of how the amplifier's power is distributed.
Applications
The XJ-300ST has countless applications because of how customizable the
channel set-up is. If you need to install in-ceiling speakers in the kitchen,
tower speakers in the living room, or rock speakers outside, the XJ-300ST
can perform accurately in every situation.

Included in the Box

1 XJ-300ST Stereo Class "J" Amplifier
4 Short Mounting Ears
12 Screws for Mounting Ears
1 Back Bracket
4 Screws for the Back Bracket
4 Rubber Feet
1 Power Cord
Specifications are subject to change without notice
XJ-300ST Manual
5

Advertisement

Table of Contents
loading

Table of Contents