EarthQuake XJ-300ST User Manual page 9

2 channel or monoblock class “j” amplifier

Hide thumbs Also See for XJ-300ST:

Table of Contents

5) AC Power with Built-in Fuse

This AC line connector is fused to protect the ampliﬁer from unwanted power

surge. Be sure to use the proper fuse rating when replacing the fuse:

110-120V~60Hz: ø5x20mm, T2AL/250V

220-240V~50Hz: ø5x20mm, T1AL/250V

To access the fuse compartment, simply unplug the

ampliﬁer from any power source, place a ﬂat-head

screw driver in the small notch and pry it open as

illustrated.

Mounting Options for 1 XJ-300ST

Wall (or anywhere) mountable

The XJ-300ST can be mounted to a wall or

inside a cabinet. Simply screw in the four short

mounting ears to the matching holes on the side

of the ampliﬁer chassis. Then, secure the

ampliﬁer to any vertical or horizontal surface.

The XJ-300ST also comes with four ruber feet

to prevent any damages to the bottom of the

ampliﬁer when it simply sits on a shelf or

cabinet.

Rack mountable

To rack mount an XJ-300ST ampliﬁer, install the long rack mounting ears (sold

separately - model no. RM-300FR) to each side of the ampliﬁer.

Specifications are subject to change without notice

XJ-300ST

XJ-300ST Manual

Table of Contents