Connecting to a Subwoofer/Tactile Transducer
To Power the THOR In-Wall Subwoofer
TRIGGER IN
Receiver/
Processor
To Power the Q10B Tactile Transducer
TRIGGER IN
Receiver/
Processor
Tactile Transducer
12
XJ-300ST Manual
+
+
Q10B
Earthquake Sound Corp. | www.earthquakesound.com
̶
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER
between 50Hz - 100Hz.
THOR IW-SUB10
In-Wall Subwoofer
̶
NOTE:
Make sure the front toggle
switch is set to LOWPASS.
Then, set the CROSSOVER
between 50Hz - 100Hz.