Saving Data; Outputting Distribution Data In Progress - Panasonic CZ-256ESMC2 Operation Manual

Hide thumbs Also See for CZ-256ESMC2:

Table of Contents

6 Using the System

6.5.5.2 Saving data

Proceed as follows to back up setting data and totals data to optional PC Cards.

Procedure

Complete the cut-off processing described in "6.5.5.1 Manual cut-off processing" and then execute

the following backup procedure.

4 Insert a PC card and touch the Backup button.

5 When a window like the one shown below

appears, touch the OK button.

* When keeping the PC card inserted in a unit, data therein are automatically backed up once a day (at

every 0 o'clock at midnight).

Save distribution data (total data) in progress before cut-off processing in PC cards (optionally

available) following the procedure stated below.

Procedure

7 Insert a PC card and touch the Distrib. dt out button.

8 When a screen like the one shown below appears, touch the OK button.

As data output by pressing the Distrib. dt out button are strictly in progress, it is impossible

to apply these data for cut-off processing for the tenant who leaves halfway. (Manual cut-off

processing is necessary).

6 When a window like the one shown below

appears, touch the Check button.

Main

Sub

Table of Contents

Show Quick Links

Table of Contents