Panasonic CZ-256ESMC2 Operation Manual page 29

6 Using the System
2 Touch a distribution group. A keyboard window like the one shown above appears. Use the keyboard
to enter a distribution group number and to select the product type from among PAC, GHP and HOT.
Select "Simple" or "Load" in the distribution methods.
* Refer to "10. Calculating air conditioner distribution" for details.
The tenant set at "Load" distribution will have its "No" box display in light blue.
* The distribution group number range is from 1 to 8.
* This button is invalid when "No Distrib." has been set. (Refer to
* The distribution group column set at loaded distribution has no product type such as "PAC" and "GHP"
displayed.
* Make manual cut-off in advance to change the distribution method.
3 Press the Type button to select "PAC" or "GHP" for the following unit that is unable to
automatically recognize product type.
- Interface Adaptor
This is only for "Simple distribution" setting.
4 Specify which distribution method, "Simple" or "Load," to apply to the selected distribution group.
5 Touch Set to confi rm the setting, or Cancel to cancel it.
• PAC, GHP, and HOT cannot be mixed in the same group. Set up a separate distribution group for each
type.
• HOT multi units cannot be recognized automatically (they are recognized as PAC). Manually set the
product type to HOT.
• HOT Tenants cannot be set at the "Load" distribution.
• "Load" distribution tenants cannot be set at "HOT".
• Air conditioners unadaptable to loaded distribution cannot be set at "Load" Distribution.
• Interface Adaptors are also unadaptable to loaded distribution.
5
5
Main
27
Main
1
1
)
Sub
3
5
5 3
Sub