Table of Contents
Advertisement
6 Using the System
6.2.2 Operating screen example
The fi gure below shows a typical operating screen.
Main menu
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
Timer
operation
mark
This lights
when an
indoor unit
is set up
for timer
operation.
Tenant selection window
Allows direct selection of
tenant names.
* See next page for details.
Notification column
Displays alarms, errors, and other messages.
Intelligent Controller – 1 – 01 – 08
Filter cleaning signs are issued only as approximate guides. We recommend that filters be cleaned
regularly, even if no sign has been issued.
Filter cleaning sign
This lights when a filter
cleaning sign has been
issued for an indoor unit.
Scrolls the display of
tenants.
Indoor address (1-64)
Outdoor address (1-30)
Link number (1,2)
Adaptor number (Intelligent Controller, 1-7)
Sub menu
Operate on all
units
Displays the current date and time.
16
Displays tenant
name.
Displays unit
name.
Scrolls the
columns
displaying indoor
units.
Reset button
Stops the buzzer and resets
the alarm display. (Depends on
the type of alarm.)
Hide quick links:
Advertisement
Table of Contents
