6 Using the System
6.8.9 Other settings
You can use this screen to register passwords, initialize data, and make power saving settings for
the LCD display.
Procedure
Select 6.Auxiliary settings in the main menu and 9.Other settings in the sub menu.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
6.8.9.1 Checking the connection confi guration
1 Touch the Chk confi g. button to check the connection confi guration of the system.
You should do this after adding or deleting units, changing addresses, and so on.
If the system confi guration has changed, cut-off processing and confi rmation of the system
processing messages appear. For details, see "6.9 System Confi guration Changes".
Up to 10 minutes may be required to check the system confi guration.
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
9.Other settings
10.WEB settings
11.User settings
65
6
9
6
9
Main
Sub
1
2
3
4
5
6
7
8