Table of Contents
Advertisement
6 Using the System
6.6 Air Conditioning Distribution Ratios and Energy Usage
6.6.1 Displaying distribution ratios and energy usage by indoor unit
Use this screen to check the distribution ratios and energy usage of indoor units.
Procedure
Select 3.Distrib. ratio/Usage in the main menu and 1.Each I/D unit in the sub menu.
*When "No Distrib." is selected, this screen is not accessible. (see
1 Selects the tenant to display.
2 Selects either the current or the past (maximum 24 months) cut-off data.
3 Selects the time zone to display.
4 Switches the gas distribution ratio and gas usage display between values for air conditioning
and values for power generation.
When "Gas usage" is displayed: Gas distribution ratios and usage for air conditioning are
shown.
When "Gas use/PwrGen" is displayed: Gas distribution ratios and usage for power generation
are shown.
For air conditioning units without a power generation feature, " – " appears under gas usage for
power generation and gas distribution ratio.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
1
• If the product type is HOT Multi, unit amount will be displayed in m
• If no pulse meter is connected, power usage and gas usage are not displayed.
• Gas usage and distribution ratios are not displayed for PAC units.
1.Each I/D unit
2.Each tenant
4
46
5
1
5
1
Main
Sub
1.All hours
2.Regular hours
3.Out of hours
4.Special Day
2
3
or liters.
3
3
Main
Sub
)
3
1
1
Hide quick links:
Advertisement
Table of Contents
