For Optional Multi-Handset Users
Registering a Handset in the Base Unit
Each optional handset that you purchase must be registered in the base unit
before use.
Charge the optional handset battery for about 3 hours before initial use.
Be sure that the power is ON (p. 16) and you are in the stand-by mode.
Register the handset number within 1 minute. If it is not registered within
1 minute, press
mode. Then start from step 1 again.
1
Base unit:
Press and hold
more than 10 seconds until the in use
indicator (
2
Handset:
Press
"
" is displayed.
3
Press
7
The base unit numbers where the handset
has not been registered are displayed.
48
(Program) on the handset to cancel the programming
(Page) for
) lights.
(Program).
, then
1
.
In Use Indicator (
Page Button
7 i i234
)