Clearing the Settings in Memory
On the base unit
This function enables the base unit to clear the following settings at one time.
All settings will return to the default settings (shown in brackets).
– Bell selection
– Dialling mode
– Pause timing
– Call restricted handset(s)
– Call restriction number(s)
– Base unit password
– FLASH/EARTH mode
1
Press
2
Press
0
3
Enter the base unit password (p. 35).
4
When finished, press
A confirmation tone sounds.
46
(Program), then
.
1 (All)
1 (TONE)
1 (3 seconds)
(All clear)
(All clear)
(0000)
1 (FLASH)
(Intercom).
I NT
(Program).
0 - - - -
- - - - - - - - - - - -