Special Features
Setting the Key Lock
You can lock the handset dialling buttons. Incoming calls can be answered, but
outgoing calls can not be dialled until the key lock is cancelled.
When the unit is in the stand-by mode, press and
hold
(Program) for about 2 seconds.
"
" is displayed.
A confirmation tone sounds.
If you press
and "
will lock and "
Cancelling the key lock
Press and hold
2 seconds.
"
" goes out.
The key lock will be also cancelled when the power is turned OFF (p. 16).
Handset Locator
From the base unit you can locate the handset or page a person at the handset
with ring tones.
Press
The in use indicator (
The handset rings for 1 minute and
"
" flashes.
The base unit number is displayed as
[0] while paging.
Ex. Handset 1 is paged.
[ I ] - [ 0 ]
To stop paging, press
press
32
(Talk) to answer a call, all of the dialling buttons will unlock
" goes out. When you press
" will be displayed again.
(Program) again for about
(Page).
) flashes.
(Talk) on the handset.
In Use Indicator (
Page Button
(Page) again or
(Talk) to hang up, the buttons
- I -
)
Talk Button